- Hot Tub
Products-
-
FROG Fresh Mineral Water
-
-
- Pool
Products-
-
FROG Fresh Mineral Water
-
-
- Swim Spa
Products-
-
FROG Fresh Mineral Water
-
-
- Fresh Mineral
Water∞-
-
FROG Fresh Mineral Water
-
-
- Water Care
Experts-
-
FROG Fresh Mineral Water
-
-
- Water Care
Blog-
-
FROG Fresh Mineral Water
-
-
- About
FROG-
-
FROG Fresh Mineral Water
-
-
Find A Dealer
FROG SooTHe™
Raises Total Hardness
0 Reviews Read Reviews | Write Review
Balancing your swim spa water just got simpler, faster and more accurate with FROG SooTHe. Featuring our exclusive FROG TruDose Cap™ and easy-to-follow dosing steps printed right on the bottle, you’ll get the perfect amount — no guesswork, no mess, no stress. Low Total Hardness? FROG SooTHe raises calcium hardness to the ideal range, protecting your swim spa from corrosion and scaling so your water stays crystal clear and your soak stays comfortable.
How to raise Total Hardness in your swim spa.
Use FROG SooTHe!
Water Care Made Simple — FROG TruDose Cap™
The TruDose Cap on FROG SooTHe takes the stress out of measuring and dosing. The TruDose Cap seals the bottle firmly. When you need to add FROG SooTHE, the TruDose Cap is always ready; its easy-to-read, built-in measurements help you add just the right amount into your swin spa water.
SIMPLY:
POUR
into the FROG TruDose Cap
MEASURE
with the built-in markings
DOSE
into the water
FROG SooTHe: Step-by-Step User Guide
Step 1:
Test water weekly with FROG® @ease® Test Strips to monitor Total Hardness.
Step 2:
Use the chart on the bottle to determine how much FROG SooTHe to add using the TruDose Cap.
Step 3:
With the jets on, pour the product into the swin spa when not occupied. Circulate jets for 30 minutes to mix thoroughly. Keep the swim spa cover off while running the jets.
Step 4:
After 2 hours, retest and repeat steps 1-4 until the ideal Total Hardness range of 150-250 ppm is met.
Compatible with our family of FROG Sanitizing Systems!
Water Balancing Tips
Water balance is key—test regularly to keep levels ideal: Total Alkalinity 80–120 ppm, pH 7.2–7.6, Total Hardness 150–250 ppm.
Always adjust Total Alkalinity first—use FROG TArget to raise it or FROG DropH to lower it. Once it’s in the ideal range of 80–120 ppm, adjust pH.
Test and adjust pH with FROG DropH or JumpH as needed. Once pH is 7.2–7.6, adjust Total Hardness.
Test water and adjust Total Hardness if needed. Total Hardness ideal level 150-250 ppm
When Total Alkalinity, pH and Total Hardness are at ideal levels, add sanitizer. Use any FROG swim spa sanitizing system or your preferred option.
FAQ’s
Also known as calcium hardness, Total Hardness refers to the amount of calcium and other minerals in the water that make it feel “hard” or “soft”. Swim spa water should maintain a Total Hardness level between 150 – 250 ppm. This should be tested when you first fill your swim spa.
When Total Hardness is below 150 ppm, the water can be corrosive; if it’s above 250 ppm, the water may lead to scaling. If you have the option of filling the swim spa with softer water, you can always add hardness. If your water is hard from the faucet, then it requires more work to get it balanced. Without a balanced Total Hardness, it will be very difficult to maintain proper balance and sanitizer levels and damage to the swim spa is almost certain.
Most often, it is due to the water that comes out of your tap to fill the swim spa. Every municipality is different, and many people have well water. Every time you add water to the swim spa due to evaporation, you are changing the Total Hardness.
The best option is to find a soft water source to fill the swim spa. Short of that, it’s best to check with your local dealer who understands what it takes to remove Hardness from swim spas in that region. If you don’t get the Hardness below 250 ppm, you will experience less effective sanitizing and damage to surfaces or equipment.
Low Total Hardness will search for any type of calcium and pull it from the swim spa surfaces, which results in pitting or etching. It also dries out skin and makes soaking an uncomfortable experience. However, there is an easy fix for this and that is to add a hardness increaser like FROG SooTHe.
SWIMSUIT SUBJECTS
Stay up to date on the latest from FROG®, sign up for our e-newsletter.
The Reviews Are In
Leave a Review
Be the first to leave a review!