1. Remove Flippin’ FROG from pool.
If the chlorine level is over 3.0 ppm, remove the Flippin’ FROG product and store in a safe place away from children, pets, metals or open flame until the level drops to 1.0 ppm.
2. Check the dial setting. Refer to the manual for the setting for your pool size. Set the dial to that setting. If you were already on that setting, adjust to a lower setting. If on the lowest setting and still over chlorinating, the product may be too big for this pool and you will need to remove it from the pool periodically or call our Customer Service for other options (800-222-0169)
3. Evaluate the pool usage. If the pool is not being used very often, then the need for chlorine (chlorine demand) is lessened. If this is a temporary situation such as during the spring when temps are cooler then consider lowering the dial setting further and decreasing the pump run time until your normal usage pattern returns.