FROG^® Maintain^® — 1 lb.

Non-chlorine maintenance shock for swim spas

Use this easy maintenance shock with an EPA-registered sanitizer to keep your water crystal clear. Eliminates organic contaminants without adding chlorine or cyanuric acid. Specifically made for monthly shocking when using FROG^® @ease^® Sanitizing Systems for Swim Spas.

Starting at $18.95

Find a Dealer

Benefits

One dose delivers clean, crystal-clear water
Maintains the clean, without chlorine or cyanuric acid
Soak-ready in 15 minutes

Directions for Use

Turn the swim spa circulation pump/jets on high.
Slowly pour out the packet of granules evenly across the surface of the spa water.
Run the jets on high for a few minutes until the product completely dissolves.
Keep the swim spa cover open for at least 15–20 minutes after shocking. The spa is safe to re-enter after 15 minutes.

Note: FROG^® @ease^® Systems: Use once a month or every time you replace the SmartChlor^® Cartridge.

FROG Serene^® or FROG^® Filter Mate^® Systems: Use once a week for routine maintenance.

Manuals & Documents

FROG Maintain Safety Data Sheets (English)

Front of a 1 lb. FROG Maintain Non-Chlorine Oxidizing Maintenance Shock pouch for swim spas, on a white background.

Back of a 1 lb. FROG Maintain pouch showing the directions and barcode, on a white background.

Hand pouring white granules from a FROG Maintain shock packet for swim spas into blue swim spa water.

It’s recommended to use FROG Maintain once per week in combination with most sanitizing systems. If using a FROG @ease Sanitizing System, add FROG Maintain once per month. It is best to add to the water after heavy use as well.

It’s a convenient, one-dose packet for periodic maintenance shocking in any swim spa up to 3,000 gallons. No measuring or guessing – just cut and pour. Non-chlorine shock means you get the clean without chlorine or cyanuric acid.

FROG Maintain removes organic contaminants and dissolves quickly so your swim spa is ready in just 15 minutes after shocking. It optimizes the performance of the FROG @ease Sanitizing System for Swim Spas.

Yes, as a monopersulfate product, FROG Maintain can be used with all other swim spa chemicals.

In indvidual 1 lb packets – 1 FROG Maintain shocks swim spas up to 3,000 gallons.

FROG Maintain is a non-chlorine shock that removes contaminants in the water in as little as 15 minutes. Recommended for use with FROG @ease Sanitizing System for Swim Spas, this simple packet makes shocking easy. With no chlorine, there is no cyanuric acid build-up that causes hard to manage, irritating water and frequent draining and refilling.

It is a convenient, one-dose packet for periodic maintenance shocking in any swim spa up to 3,000 gallons. No measuring needed and no guessing either – just cut and pour. Once in the water FROG Maintain quickly dissolves and eliminates organic contaminants. Non-chlorine shock means you get the clean without chlorine.

Shock only once a month, when the FROG @ease System tilts at about 3/4 rotate over in the water, typically at about 3 weeks, add a packet of FROG Maintain for Swim Spas to maximize the life of the SmartChlor Cartridge up to one more week.