Free $15 Visa® eGift Card with FROG® @ease+™, Nov. 1–30 only! Find Out More

FROG Phosphate Remover 4Pro®

Professional-grade pool phosphate remover in pre-measured, lightweight Drop ’n Go® Pool Pods

Made by the Pros for the Pros™. These thin fabric Pool Pods contain a concentrated dry chemical blend to effectively reduce phosphate buildup. Simply drop in the skimmer and run the pump. No heavy liquids. No measuring. No mess. Simplifies pool care.

Contact Us for Pricing

Find a Dealer

Benefits

  • 7x lighter than a quart of liquid chemicals
  • 1 pod per 30,000 gallons removes 1,000 ppb of phosphates
  • Compatible with in-ground, above ground, chlorine and salt pools

Before Applying FROG Phosphate Remover 4PRO:

Make sure all pool equipment is working properly, including pump, filter, skimmer and heater. If recently used FROG® Algae Blocker 4Pro™, wait at least 2 weeks before using FROG Phosphate Remover 4Pro.

Curative

Removal: 1,000 ppb or 1 ppm of phosphate.

1. Backwash or clean filter according to manufacturer’s instructions.

2. Using chart – Apply appropriate number of pods to the skimmer or pump basket. No more than 3 pods in pump basket at once.

7,500 – 10,000 gallons 1 pod

10,001 – 20,000 gallons 2 pods

20,001 – 30,000 gallons 3 pods

3. Allow pump and filter to run continuously for 24-48 hours.

4. Don’t backwash filter for 2 weeks after application. Pools less than 7,500 gallons – be prepared for excessive clouding and flocculation of the pool.

Note: If high levels of phosphates are present when you first use this product, the pool may become cloudy; particulates may drop to the bottom of the pool and should be vacuumed out.

Continue to run the pump for 72 hours and backwash or clean the filter if the pressure increases 8-10 psi. Once pool water is clear, to maintain sparkling water, we recommend using FROG Clarifier 4Pro™ (a pool clarifier) to help give the pool that extra sparkle.

Preventative

Control the pool’s phosphate levels all year long!

1. Backwash or clean filter according to manufacturer’s instructions.

2. Add 1 pod per 30,000 gallons to the skimmer or pump basket.

3. Allow pump and filter to run continuously for 24-48 hours.

4. Don’t backwash filter for 2 weeks after application.

5. Apply a new pod every month to prevent phosphate build-up.

Frequently Asked Questions

Typically, in a few hours—no more than 24. The empty pod will float to the top of the skimmer or pump basket where it can be easily removed and discarded on you next service call.

When you use FROG Phosphate Remover 4Pro, start with a clean filter. Do not clean or backwash the filter for at least 2 weeks after using the product.

Make sure the bucket is sealed and always store in a cool, dry, well-ventilated area until ready to use. It’s important to keep the desiccants in the bucket, do not discard them.

Yes — with one important distinction.

If you are using Algae Blocker as a curative, be sure to backwash or clean your filter first, then use the Algae Blocker before adding any other pods.

If you are using Algae Blocker as a preventative, you may use it at the same time as the Phosphate Remover and Clarifier. In this case, place all 3 pods in the skimmer or pump basket together after backwashing or cleaning the filter. Do not backwash or clean the filter for at least 2 weeks after using the pods.

Competitive products need to be carefully measured to avoid overdosing. Additionally, they recommend you try to distribute the prescribed dose evenly by walking around the perimeter of the pool while pouring out the contents. With FROG Phosphate Remover Pro, you simply place the pre-measured pod into the skimmer or pump basket and it will dispense within hours.

Let’s Connect

Smartphone showing the FROG® Water Care App home screen with a personalized greeting, a preferred dealer card for Poolwerx in Minnetonka, and a “Test my water” button below a photo of a couple relaxing in a hot tub.

Have a Water Care Expert in the Palm of Your Hand

Sign Up for Our e-Newsletter